X-431 IMMO ELITE is a new generation of 8-inch automobile special anti-theft matching tool with high configuration and superperformance.The host is developed based on the Android 10.0 open system, adopts a 2.0Ghz 4-core high-efficiency processor,4GBRAM+64GBROM large storage, and is equipped with a high-endurance battery, which make the diagnosis faster, more stableand more durable. X-431 iMMO ELITE integrates powerful anti-theft matching, anti-theft programming, ful-model system-widediagnosis of basic functions and special functions. Iti the best choice for intelligent maintenance of the anti-theft matching tool inrepair shops.

LAUNCH X431 IMMO Elite PRO supports 24 kinds of Language( supports most language ) :

Italian, English, Chinese Simplified, Chinese Traditional, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian , Romanian, Serbian, Finnish, Swedish, Czech

LAUNCH X431 IMMO Elite Pro Supports CANFD and DIOP protocol now , it supports For GM after 2020 !

LAUNCH X431 IMMO Elite Pro Supports CANFD and DIOP protocol now , it supports For GM after 2020 and other New cars !

CANFD :

it is the only product in this price range that is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.

Supports For Chevrolet Onix 2020-2021 year
Supports For Chevrolet Tracker 2020 year
Supports For Chevrolet Suburban 2021 year
Supports For Chevrolet Tahoe 2021 year
Supports For Buick
Supports For Cadillac Escalade 2021 year
Supports For Cadillac Escalade 2021 year
Supports For GMC Yukon 2021 year
Supports For GMC Yukon XL 2021 year
Supports For Holden
Supports For DAEWOO
Supports For Alpheon
Supports For Ravon
Supports For Pontiac
Supports For Saturn
Supports For Hummer

DOIP

With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. That makes LAUNCH X431 IMMO Elite Pro save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).

( Note : this is car list that CANFD and DIOP supports , X431 IMMO Elite Pro also supports other cars , more than about 100+ brands , like for bmw , for vw , for ford etc , there has the detailed car list in the following description , you can check ）

LAUNCH X431 IMMO Elite Pro Features :

* Strong core, large memory, super battery life.
* lt integrates professional anti-theft matching, anti-theft programming,full-model system-wide diagnosis of basic functions and special functions. One machine with multiple functions and high performance cost ratio.
* All-round anti-theft matching, fast and accurate reading of anti-theftdata .
* Covering the anti-theft matching function of many models in Asia,Europe, and America, more brands continue to be launched, up to60+ brands .
* support the full-model system-wide diagnosis of basic functions(read version information, read DTCs, clear DTCs, read data streams)for global 110+ brands .
* support 10 special functions such as service lamp reset, throttlematching, steering angle reset, brake pad reset, tire pressure resetSupport the VIN intelligent identification function to quickly enterdiagnosis .
* Fast and accurate diagnosis.

LAUNCH X431 IMMO Elite Pro Advantage :

1. Independent anti-theft menu, more convenientoperation

With the unique anti-theft matching and anti-theftprogramming modules, in-depth development andoptimization have been carried out for the anti-theftsoftware of American,European and Asian car models.

2. Powerful anti-theft function, support a widerange of models

Support anti-theft type identification, anti-theftpassword reading, remote control matching, keymatching, key chip reading and writing, anti-theft parts replacement and other functions,support up to 60+ brands, and the coverage ofmodels continues to increase

3. Anti-theft advantages

* Support replacement or cloning of for VW/Audi MQB platform engine ECu (no need for the original car engine ECU data, it can be read directly from the key)
* Support replacement or cloning of for VW/Audi MQB platform gearbox ECU
* Support replacement of FOR Audi (0AW/0B5) fifth-generation gearbox ECU
* Support reading/writing and cloning of for VW fourth-generation UDs engine ECU
* Support the cloning in for BENCH mode without disassembly for more than 170 types of for Bosch engine ECUs, morethan 10 types of Siemens engine ECUs, and 18 types of gearbox ECUs (covering various European, American andAsian models, and continuing to increase)
* Support the erasing function for for Mercedes-Benz engine, gearbox, ElS, and for BMW gearbox.
* Support the matching function and password calculation function for all models of for Chery sedan and for JAC passengercars up to 2021

4. Anti-theft module replacement

Support the anti-theft module replacement functionfor models such as for BMW, for Mercedes-Benz, for Volkswagen, for Audi, for Porsche, for Honda, for Nissan, for Hyundai, for Kia, for BYD, for Changan Automobile, for Wuling Baojun, for GAC Trumpchi, for SAIC Maxus, for Great Wall Motor , for Chery, for Dongfeng, for Fengxing, and for JAC passenger cars.

5. Anti-theft password reading

Support the anti-theft password reading function for models such as for BMW, for Mercedes-Benz, for Volkswagen, for Audi, for Peugeot, for Citroen, for GM, for Nissan, for Hyundai, for Kia, for Chery, for Dongfeng Fengxing, and for JAC passenger cars.

6. Key matching

support the key matching function for models such as for Ford, for GM, for Mercedes-Benz, for BMW, for Volkswagen, for Audi, for Porsche, for Peugeot, for Citroen, for Land Rover, for Jaguar, for Honda, for Toyota, for Nissan, for Hyundai, for Kia, for Great Wall Motor, for Chery, for Changan Automobile, for JAC Passenger Cars, for Wuling, for Baojun and for BYD.

LAUNCH X431 IMMO Elite Pro Supports Anti-theft Matching Function

Support 60+ brands of independent anti-theft matching software for American, European, and Asian models. Support further in-depth development and coverage of anti-theft software for various models. Support more password reading, key adding, all keys losing and anti-theft related module replacement functions. Menus are optimized, the operation process is more convenient, and more brands continue to be launched.

LAUNCH X431 IMMO Elite Pro Supports Anti-theft Programming Function

Support car key chip reading/writing, EEPROM chip reading/writing, MCU chip reading/writing, EEPROM and FLASH reading/writing of engine ECU and gearbox ECU

LAUNCH X431 IMMO Elite Pro Supports All System Diagnosis Function

The Full Systems of the car mainly including Drive System, Chassis System, Body System, Electrical system :

1.PCM(Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear, and more...

2. Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more...

3.BCM(Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition.Electric Windows, Telephone, and more...

4.Electrical System: Including Centralized control system for engine and power transmission, Chassis integrated control and safety system, Intelligent body electronic system, Communication and information / entertainment system.

It supports the detailed Function :

--read fault codes: read and decode the DTCs to identify where the fault location is;
--clear fault codes: erase the DTCs to turn off the MIL after repairs;
--retrieve ecu information: allows you to retrieve vehicle information;
--Graph live data stream: view the dynamic data stream to determine vehicle condition

With the Diagnose Function , you can enhance performance, save energy, reduce emissions and more as following:

For Engine: detect common issues as Poor lubrication, Failing oil pump, Oil deposits and debris, Inadequate fuel and air compression, Leaking engine coolant, Blocked engine radiators, Prolonged engine detonation, Damaged oxygen sensors, Aged spark plugs, etc.

For SRS: pinpoint the trouble area as: a bad seat belt, a corroded crash sensor, or some water intrusion in a connector, etc.

For ABS: diagnose Blown sensor fuse, Low brake fluids, and Faulty sensor, etc.

For Transmission: avoid Grinding or shaking sensation in gear, Whining, humming or clunking noises, Burning smells, Gears Slipping, Low or Leaking Transmission Fluid, etc.

For TPMS: verify problems of Low tire pressure, Faulty in tire pressure monitor control module, Unknown tire sensor, Failure to identify tire sensor, etc.

LAUNCH X431 IMMO Elite Pro Supports 33 Reset Function

( pls note different reset function supports different cars , also supports some cars , not for all cars , pls contact us check the detailed car list , you also can check in the link directly : https://qcar.x431.com/qcar/#/pc/index?q=eyJsYW4iOiIxMDAyIn0%3D ）

1> Oil Reset Service

This function enables you to reset the oil service for the engine oil life system,which calculates an optimal oil life change interval depending on the vehicle driving conditions and weather events.
lt needs to be performed in the following cases:
1. lf the service lamp is on, run car diagnostics first for troubleshooting.Afterthat, reset the driving mileage or driving time, so as to turn off the servicelamp and enable a new driving cycle.
2. lf the service lamp is not on, but you have changed the engine oil or electric
appliances that monitor oil life, you need to reset the service lamp.

2> Electronic Parking Brake Reset

This function enables you to reset the brake pad after replacing the brake pad.lt needs to be performed in the following cases:
1.The brake pad and brake pad wear sensor are replaced.
2.The brake pad indicator lamp is on.
3.The brake pad sensor circuit is short, which is recovered.4.The servo motor is replaced.

3> Steering Angle Calibration

This function enables you to reset the steering angle,after replacing thesteering angle position sensor,replacing steering mechanical parts (such assteering gearbox,steering column, end tie rod, steering knuckie), performingfour-wheel alignment, or recovering car body.
To reset the steering angle, first find the relative zero point position for thecar to drive in straight line. Taking this position as reference,the ECU cancalculate the accurate angle for left and right steering.

4> ABS Bleeding

This function allows you to perform various bi-directional tests to check theoperating conditions of Anti-lock Braking System(ABS).
lt needs to be performed in the following cases:
1. When the ABS contains air.
2. When the ABS computer, ABS pump, brake master cylinder, brake cylinder,brake line, or brake fluid is replaced.

5> Gear Learning

This function enables you to perform tooth learning for the car, to turn off the MIL.
lt needs to be performed in the following cases:
1. After the engine ECu, crankshaft position sensor, or crankshaft flywheel isreplaced.
2. The DTC 'tooth not learned' is present.

6> IMMo Service

This function enables you to perform the anti-theft key matching function, sothat the immobilizer control system on the car identifies and authorizes remotecontrol keys to normally use the car.
lt needs to be performed in the following cases:
When the ignition switch key, ignition switch,combined instrument panel,ECU,BCM, or remote control battery is replaced.

7> Injector Coding

This function enables you to write injector actual code or rewrite code inthe ECU to the injector code of the corresponding cylinder，so as to moreaccurately control or correct cylinder injection quantity.
lt needs to be performed in the following cases:
After the ECu or injector is replaced.

8> Battery Maintenance System Reset

This function enables you to perform a resetting operation on the monitoringunit of vehicle battery, in which the original low battery fault information will becleared and battery matching will be done.
lt needs to be performed in the following cases:1. The main battery is replaced.
2. The battery monitoring sensor is replaced.

9> Diesel Particulate Filter (DPF) Regeneration

This function enables you to clear PM(Particulate Matter) from the DPF filterthrough continuous combustion oxidation mode (such as high temperatureheating combustion,fuel additive or catalyst reduce PM ignition combustion)to stabilize the filter performance.
lt needs to be performed in the following cases:
1. The exhaust back pressure sensor is replaced.
2. The PM trap is removed or replaced.
3. The fuel additive nozzle is removed or replaced.
4. The catalytic oxidizer is removed or replaced.
5. The DPF regeneration MlL is on and maintenance is performed.
6. The DPF regeneration control module is replaced.

10> Electronic Throttle Position Reset

This function enables you to make initial settings to throttle actuators andreturns the learned values stored on ECU to the default state. Doing so canaccurately control the actions of regulating throttle (or idle engine) to adjust theamount of air intake.

11> Gearbox Matching

This function enables you to complete the gearbox self-learming to improvegear shifting quality.
lt needs to be performed in the following cases:When the gearbox is disassembled or repaired.

12> AFS (Adaptive Front-lighting System) Reset

This function enables you to initialize the adaptive headlamp system.

13> Sunroof Initialization

This function enables you to set the sunroof lock off,closed when it rains,sliding / tilting sunroof memory function, temperature threshold outside the caretc.

14> Suspension Calibration

This function enables you to adjust the height of the body.
lt needs to be performed in the following cases:
1. When replacing the body height sensor， or control module in the airsuspension system.
2. When the vehicle height is incorrect.

15> EGR Adaption

This function is used to learn the EGR(Exhaust Gas Recirculation) valve afterit is cleaned or replaced.

16> Seats Calibration

This function is applied to match the seats with memory function that arereplaced and repaired.

17> Tyre Reset

This function is used to set the size parameters of the modified or replacedtire.

18> Coolant Bleed

Use this function to activate the electronic water pump before venting thecooling system.

19> AdBlue Reset (Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, ureareset operation is required.

20> NOx Sensor Reset

NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) inengine exhaust. lf the NOx fault is re-initialized and the NOx catalytic converteris replaced, it is necessary to reset the catalytic converter learned value storedin the engine ECu.

21> Ac System Initialization

AC system releam/initialization must be performed when the vehicle AC ECUor actuator is replaced or the ECu memory is lost.

22> High Voltage Battery Detection

This function is used for high voltage battery diagnosis and status informationdetection.

23> Windows Calibration

This function is used to perform door window matching to recover the ECuinitial memory, and recover the automatic ascending and descending functionof power window.

24> Language Change

This function is used to change system language of vehicle center console.

25> AF Reset

This function is applied to set or learn airlfuel rate parameters.

26> Transport Mode

To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open anddisable remote key etc. In this case, deactivating transport mode is needed torecover vehicle being normal.

27> StoplStart Reset

This function is used to open or close the automatic StartStop function viasetting the hidden function in ECU (The precondition is vehicle equipped withhidden function and hardware support).

28> Intelligent Cruise Control System Reset

This function is used to matching the intelligent cruise control module after it isreplaced or repaired.

29> Engine Power Balance Monitoring

This function is used to monitor crankshaft acceleration in the power stroke ofeach cylinder, to determine the relative power provided by each cylinder.

30> Gas Particulate Filter (GPF) Regeneration

This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resultingfrom a long time service of the GPF.

31> Motor Angle Calibration

This function is used to perform the motor angle calibration when the rotorposition detected by the motor angle position sensor is different from theactual rotor field position.

32> Automatic air conditioning initialization software Reset Service ( RESET ACINI )

33> Electronic water pump starts Reset ( RESET COOLANT )

.......

The Function Function of LAUNCH X431 IMMO Elite Pro :

1. Remote Diagnosis

Remote diagnosis can realize real-time communication between equipment and equipment or between equipment and computer, complete vehicle remote diagnosis, and make it a reality for repair technicians to diagnose vehicles thousands of miles away.

2. Information Center

The information center integrates maintenance information, general information and equipment information, and is an information query center.
Equipment information includes product manuals, FAQs, and more. The product manuals are provided in 9 languages. Switch the corresponding language to view the manuals in the corresponding language.
Maintenance information includes operation skills, DTC help, vehicle maintenance technical manuals and anti-theft database.

3. Diagnostic Feedback

When users encounter abnormal models and functions under special circumstances during use, they can provide opinions to Launch through diagnostic feedback, and special technical personnel will track and deal with the problems in time.

4. Diagnostic Records

During every diagnostic process, a vehicle diagnostic record is automatically generated, which is easy to view and compare at any time and help locate faults.

5. Testable Models Checking

You can query the supported brands, models, systems, and functions online at any time.

How to use LAUNCH X431 IMMO Elite Pro :

Connection method 1: Directly connect to OBD16 for key matching, data reading/writing, etc.

Connection method 2: Place the anti-theft EEPROM or MCU chip into the chip burn-in socket, and then insert the chip burn-in socket into the slot of the anti-theft matching programmer locker to realize the data exchange between the IC anti-theft chip and the diagnostic host.

Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the connecting wire to realize the data exchange between the anti-theft ECU and the diagnostic host.

Connection method 4: After the ECU is removed from the car, it is directly connected in the BENCH mode to realize the data exchange between the anti-theft ECU and the diagnostic host.

LAUNCH X431 IMMO Elite Pro Supports Car List :

For IMMO Function :

Europen Cars :

For Audi, For Benz, For BMW, For Citroen, For GM, For Land Rover, For Mazda, For Opel, For Peugeot, For Porsche, For Renault, For MG (SAIC), For Seat, For Skoda, For Sprinter, For Suzuki, For Ford, For Volvo, For VW

China Cars :

For GWM, For Changhe, For Brilliance, For Chery, For FAW Tianjin, For ZX Auto

America Cars :

For Aston Martin, For Fiat (Brazil), For Chrysler, For Ferrari, For Fiat, For Maserati

Asia Cars :

For BAIC, For Changan, For BYD, For Foton, For Haima, For Honda, For Hyundai, For Kia, For Maxus, For Mitsubishi, For Nissan, For Perodua, For Proton, For Subaru, For Toyota, For Zotye

For Diagnostic Function :

European Cars :
For Martin Aston, For BENZ/MAYBACH, For BMW/MINI/HCBMW/ROLLSROYCE, For CITROEN/FUKANG, For Ferrari, For Fiat/Abbas/Lancia/Romeo/NanjingFiat, For GAz, For IZH, For Land Rover/Jaguar, For Martha Lahti, For OPEL/GMSA/VAUXHALL, For PAZ, For PEUGEOT/DFPEUGEOT, For Porsche, For RENAULT, For DACIA, For Saab, For Skoda, For Seaz, For Seat, For Smart, For Transporter&V-Class, For UAZ, For VAZ, For Volvo, For VW/BINGLEY/BUGATTI, For ZAZ

China Cars :
For Beijing, For Chang'an, For ChangCheng, For Changhe, For Xiaokang, For DR, For ECUAID, For BYD, For Foton, For HaFei, For Haima, For Brilliance, For Jiangling, For Iveco, For JAC, For Gonow, For Xiamen Golden, For Kowloon, For Lifan, For SGMW, For SAIC Chase, For MVM, For Chery, For SAIC&MG, For SGM/CHCHEVROLET/CHBUICK/CHCADLLAC, For GAC Chuan Qi, For Tianjin FAW, For ZhongShun, For ZOTYE, For Zhongxing

America Cars :
For Brazil Fiat, For GM, For CHRYSLER/DODGE/JEEP, For GM/BUICK/CADILLAC/CHEVROLET, For Ford/ChinaFord Lincoln/EuropeanFord, For vinfast

Asia Cars :
For Daewoo, For Daihatsu, For HONDA/ACURA/DFHONDA/GZHONDA, For Hyundai, For INDIAN MAHINDRA, For INDIAN MARUTI, For INDIAN TATA, For JPISUZU/TLISUZU, For Kia, For LUXGEN, For Mahindra, For MARUTI, For PERODUA(Perodua), For MAZDA/YQMAZDA, For Mitsubishi, For NISSAN/INFINITV/DFNISSAN, For Perodua, For Proton, For SAIP, For Ssangyong , For Subaru, For Suzuki, For TATA , For TOYOTA/LEXUS/TJTOYOTA

Australia Car :
For Holdon

LAUNCH X431 IMMO PRO Parameter :

Processor: 2.0GHz 4-core
Operating: Android 10.0 system
Memory: 4GB
Storage: 64GB
Battery: 47880mWh(7.6V,6300mAh)
Display: 8-inch, 1280*800
Camera: Rear 8MP
WIFl: 2.4GHz/5GHz (dual frequency)
Interface: TYPE A *1&TYPE C*1
Operating temperature: 0~50℃

LAUNCH X431 IMMO PRO Packing List :

Box 1 :
1pc * X-431 IMMO PRO V5.0 Host
1pc * DBSCAR VII Diagnostic Connector
1pc * X-431 IMMO PRO Test Main cable
1pc * Power adapter 5V/5A with 1.2m cable ( US , EU & UK charger )
1pc * X-431 IMMO Pro Quick Start ( Multilingual)
1pc * X431 PIN Envelope
1pc * type A to type C USB Data Cable

Box 2 :
1pc * Main unit
1pc * Power adaptor
1pc * Main diagnostic cable
1pc * The fourth-generation data acquisition cable
1pc * The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc * BENCH mode cable. MCu converter V1. MCU converter V2
1pc * Mcu cable with multiple leads.EEPROM chip adaptor
1pc * Benz infrared analog acquisition key
1pc * MCU cable with multiple leadsEEPROM converter
1pc * User Manual