Home > Products
Model | O2-1 | O2-2 |
Channel | 4 | 4 |
Bandwith | 100MHz | 100MHz |
Rise Time | ≤3.5ns(typical) | ≤3.5ns |
Maximum sampling rate | 1Gbps(for four channels) | 1Gbps |
Input resistance | 1MΩ±1.5% | 1MΩ±1.5% |
Storage depth | 50M | 10M |
Number of sampling bits | 8bit | 8bit |
vertical accuracy | 3% | 3% |
Vertical gear | 5mV~10V | 5mV~10V |
Inverting | Support | Support |
Channel coupled | DC, AC | DC, AC |
Time base gear | 5ns~1ks | 1ns-1ks |
Time base accuracy | 20ppm | 20ppm |
Sampling mode | Normal | Normal |
CANBus decoding | CAN, LIN | CAN, LIN |
Trigger type | Edge, Pulse width | Edge, Pulse width |
Trigger mode | Normal, Auto and Single SEQ | Normal, Auto and Single SEQ |
Trigger coupling | DC, Noise rejection | DC, Noise rejection |
Math | Double wave\FFT | Double wave\FFT |
Display | YT、Zoom、Roll | YT、Zoom、Roll |
Roll mode | 200ms/div~1000s/div | 200ms/div~1000s/div |
Auto configuration | Support | Support |
Auto measurement | 23 | 23 |
Cursor | Horizontal cursor, Vertical cursor | Horizontal cursor, Vertical cursor |
Powered by | USB port, DC IN port | USB port, DC IN port |
Data transmission method | USB | USB |
Vehicle configuration options | Circuits, sensor, actuators, ignition | Circuits, sensor, actuators, ignition |
Operating temperature | 0℃~50℃ | 0℃~50℃ |
Power supply range | USB:5V/1A DC:12V/24V |
USB:5V/1A DC:12V/24V |
Compatibility | Different tablet resolutions require different APPs | One APP can be compatible with multiple tablet resolutions |
Multi-touch gestures | No | Supports 2-point touch, the waveform can be zoomed in or out vertically or horizontally |
Vehicle configuration | No | Each test project can support online help documentation (help documentation will be compiled according to needs later) |
Firmware upgrade | Manual upgrade | Support online upgrade |
Trigger | Waveform observation cannot be expanded during normal trigger waiting. | Can be used normally during normal trigger waiting. |
Demo function | No | Yes |
Split-screen | No | Yes |
Sampling rate | Single channel 1G/s, more than 2 channels only 250M/s | Single channel 1G/s, 2 channels 500M/s, multiple channels 250M/s |
Start time | 2-3S | about 16s |
Power consumption | about 6W | about 7.5W |
Channels | 4 |
Bandwidth | 100MHz |
Rising Time | 3.5ns (typical) |
Accuracy | ±3% |
Input Impedance | 1M ±1.5% |
Input Type | Single-ended, BNC Connector |
Input Coupling | DC, AC |
Overload Protection | ±200V on single input |
Timebase Ranges | 1ns~1ks (1 Channel) |
1ns~1ks (2 Channels) | |
1ns~1ks (4 Channels) | |
Vertical Resolution | 8bits |
Buffer Memory | 10M (for 4 Channels) |
Power Interface | USB port, DC IN port |
Data Exchange Via | USB |
Trigger Mode | Normal, Auto and Single SEQ |
Advanced Triggers | Edge, Pulse width |