Xhorse VVDI2 V5.5.0 VVDI2 Full Version Commander Key Programmer VVDI2 Full Version

V5.5.0 VVDI 2 Key Programmer

Top 6 Reasons to Get VVDI2:

1. This VVDI2 Full Package Contains for PSA function, for AUDI Generation 5, for BMW OBD Fucntion and for BMW CAS4+ Functions Already, No Need Other Authorization
2. VVDI2 Full Package Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, for BMW Multi Tool, CAS Plus for BMW Multi Tool, CAS4 Plus for BMW Multi Tool
3. Support for VW, for Audi, for BMW AND for Porsche
4. Update Online Free Lifetime
5. Latest Version: V6.0
6. Provide Trade Service for Old VVDI

Note: VVDI2 now add for BMW FEM & BDC functions, VVDI2 Must have for BMW OBD Function,then can open this function.
There are two ways to get this function:
1.If you only have VVDI2(SV86, SV86-B+SV86-3,and SV86-D) on our site, then you can contact us pay to get this authorization.
2.If you have VVDI2(SV86, SV86-B+SV86-3,and SV86-D) + Ikeycutter Condor(SL273)on our shop,then you can contact us pay to get this authorization.
3.If you want other for BMW FEM BDC Key Programmer, you can choose YH for BMW FEM (SK226) on our site.

VVDI2 - for BMW FEM/BDC system (function released and available, just no user manual)

Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding 

This VVDI2 Version with Activated Software List as below:

1) VV-01 VAG 4th immobilizer
2) VV-02 VAG 5th immobilizer
3) VJ-01 Passthru J2534
4) VV-05 VAG MQB Immobilizer
5) VB-01 BMW OBD
6) VB-02 BMW CAS4
7) VP-01 Porsche immo data tool
8) VPSA-01 PSA
9) VK-01 Transponder Programmer


Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "for BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-for BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "for BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.