Cheap ad-BlueOBD2 Emulator for SCANIA Trucks
ad-BlueOBD2 is a Plug&Drive Ready device to mulate working ad-Blue systems and NOx sensors on trucks, which equipped with EURO 4/5 catalytic converter systems, even with damaged ad-Blue SCR system.
ad-Blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles.We recommend you to use ad-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.
Top 5 Reasons to Get Ad-blueOBD2 Emulator for Scania Trucks:
1. ad-BlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ad-BlueOBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ad-BlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ad-BlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug ad-BlueOBD2 from OBD2 connector.
Installation and Calibration for SCANIA Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (SCANIA) Terminal- 42
3. Plug ad-BlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Package including:
1pc x adBlueOBD2 Emulator Box Interface
Skype
13438965649
